Name: Addessable LED Bar/Programable Bar
Item No.: ML-LB5050P42
LEDS: 36/42/48pcs SMD5050 leds
LED brand: Epistar
Chip: WS2801, LPD6803, WS2811, UCS1903 and so on
Voltage: DC12V
Watt: 8.64w, 10w, 11.52w
Color: Pixel RGB
Size: 12mm PCB Board
Working Temperature:-20 - 45℃
CRI: Ra>80
Control way: DMX512 standard controlled
Connection
1) Signal wire: DC+, DIN, GND.
2) DC+ and GND connect to power supplier; DIN and GND connect to controller.
3) Relative Controller: DMX decoder, can connect to DMX system.
Installation Notice
1) Make sure the connection is correct according to the diagram.
2) Pay attention to the parameters limit of voltage. DO NOT run over the peak value.
3) Keep the surface of installation clean and smooth avoid breaking off.
4) Avoiding the crook area just the position of LED and other components, in order to protect the product and extend the life span of the product.
